Today, Wednesday, 18 November 2026 (IST)
Nifty option chain today
Educational, not investment advice · Updated Wednesday, 18 November 2026 IST
This page is for education only. It is not a recommendation to buy, sell or hold any security or derivative. Tredye is not a SEBI-registered investment adviser or research analyst. Live market numbers appear only after you connect your own broker in this browser. Tredye does not scrape the NSE website. Any table marked example data is made up, so you can practise reading the chain — it is not today's market.
What to watch today. During the week, compare today's PCR and max-pain strike with the labelled example below, and (if your broker is connected) with your own live chain. Watch which strikes gain OI and which lose it.
No broker is connected in this browser, so the panel below stays on the labelled example. Connect to load today's Nifty chain from your own broker — Tredye does not scrape NSE.
What a Nifty option chain actually shows
A Nifty option chain is a table of every listed call (CE) and put (PE) strike for a chosen expiry. Indian brokers usually put calls on the left, the strike in the middle, and puts on the right. Each side shows last traded price (LTP), volume, open interest (OI), change in OI, and implied volatility (IV). The chain does not tell you what will happen next. It only shows where traders currently have positions.
Three columns matter most when you first open it:
- Strike and ATM. The at-the-money (ATM) strike is the one closest to the Nifty spot. Strikes below spot are in-the-money for calls and out-of-the-money for puts; the opposite is true above spot.
- Open interest (OI). How many contracts are still open at that strike. High OI means many positions, mostly from option writers, are sitting there.
- Change in OI. Whether those positions were added or closed today. This is the “build-up vs unwinding” reading.
If you want a slower walkthrough, see the Academy lesson How to read an option chain and What is open interest.
Worked example (not today's live market)
Imagine Nifty spot is 24,500 and this week's example expiry is in a few days. The table below is made up, with round numbers, so you can practise the same steps you would use on a live chain.
| Strike | Call OI | Call ΔOI | Call IV | Put OI | Put ΔOI | Put IV |
|---|---|---|---|---|---|---|
| 24,300 | 48,000 | +2,000 | 11.2 | 1,20,000 | +18,000 | 12.8 |
| 24,400 | 72,000 | +5,000 | 10.8 | 1,55,000 | +22,000 | 11.9 |
| 24,500 | 1,10,000 | +9,000 | 10.5 | 1,10,000 | +8,000 | 10.6 |
| 24,600 | 1,80,000 | +25,000 | 11.1 | 70,000 | +4,000 | 10.2 |
| 24,700 | 1,40,000 | +12,000 | 12.0 | 42,000 | +1,500 | 10.0 |
In this example:
- ATM is 24,500, because that is the closest strike to spot.
- Put-call ratio (PCR) on these five strikes is total put OI (4,97,000) divided by total call OI (5,50,000), which is about 0.90. A reading near 1 is balanced. Below 0.8 often means call writers are heavier; above 1.2 often means put writers are heavier. Use the full chain, not five rows, in real life. See PCR explained.
- Call wall (heaviest call OI) is 24,600. Traders often read a heavy call wall as a zone of resistance, because call writers may try to defend it — until they don't.
- Put wall (heaviest put OI) is 24,400, often read as a support zone, with the same caveat.
- OI build-up: the 24,600 call added 25,000 contracts, the largest call addition in the example. The 24,400 put added 22,000, the largest put addition. Fresh writing at those walls is “build-up”. If ΔOI were sharply negative while price moved through the strike, that would be “unwinding”.
- Max pain in this stylised chain sits at 24,400–24,500 (the strikes where writers, taken together, would lose the least if expiry landed there). Max pain is a calculation, not a magnet you should trade blindly. See Max pain explained.
Walk the same four numbers on your live chain after you connect: PCR, max pain, call wall, put wall. Then look at ΔOI to see whether those walls are being built or taken down today.
How to read PCR on today's Nifty chain
OI PCR = total put open interest ÷ total call open interest, usually for one expiry. Volume PCR uses today's traded volume instead of OI and can swing more.
- PCR clearly above 1: more put OI than call OI. This often appears when traders have bought or written many puts. It is commonly read as a cushion under the market, but a falling market can still force put buyers and writers to adjust.
- PCR clearly below 1: more call OI. Commonly read as a heavier call-writing (range or resistance) setup, especially if the extra calls sit just above spot.
- A single print is less useful than the change. If PCR jumps because puts were added under spot, that is a different story from PCR jumping because calls were closed.
Do not treat a “high PCR means buy” or “low PCR means sell” rule as advice. PCR is one descriptive ratio. Combine it with where the OI actually sits, and with your own risk limits.
Max pain, in plain words
For each possible expiry level, add up what call writers and put writers would be worth if Nifty finished there. The strike where that total is smallest is called max pain. The idea is that option writers, as a group, would be least uncomfortable if the index expired near that strike.
Useful caveats: it changes through the day as OI shifts; it is more talked about near expiry; and it is not a promise that Nifty will “pin” there. Use it as a map of where writers are concentrated, not as a target.
OI build-up versus unwinding
Price and ΔOI together are the usual four-box reading:
- Price up, call OI up — short call build-up (writers adding calls), often read as resistance being reinforced.
- Price up, put OI up — short put build-up, or covering depending on context; look at which strikes and at LTP.
- Price down, put OI up — put writing or put buying under the market; check whether puts are being added below spot (defensive writing) or ATM.
- OI falling while price breaks a wall — unwinding. The old support or resistance may not hold once writers close or roll those positions.
Angel One, in particular, may not send option OI in the browser. If your connected broker does not provide OI, Tredye will say so clearly and still show whatever IV or greeks that broker does allow. That is a broker-data limit, not a missing NSE scrape — we do not fetch the exchange site.
How to see today's live Nifty chain on Tredye
Click Connect your broker to see today's live chain, pick a broker (Upstox, FYERS and Angel One have free market-data apps; Kite Connect and Dhan Data API are paid by the broker), and stay in this browser. Your API keys, PIN and OTP stay on your device. After a successful login, this page fills the live panel above the example from your broker's option chain. For the full smile, writers' range and more expiries, open the Options dashboard.
Without a broker connection, you still have this guide and the labelled example — never a silent copy of NSE's website.
Frequently asked questions
Where can I see the Nifty option chain today on Tredye?
Connect your broker with the button on this page. Tredye then fills the live panel from your broker's Nifty option chain in this browser. Without a connection, you can still read the guide and the labelled example. Tredye does not scrape the NSE website.
What is PCR on a Nifty option chain?
The put-call ratio (PCR) from open interest is total put OI divided by total call OI for an expiry. A reading near 1 is roughly balanced; much above 1 means more put OI, much below 1 means more call OI. It is a description of positioning, not a buy or sell signal.
What is max pain in Nifty options?
Max pain is the strike where option writers, taken as a group, would lose the least if the index expired there. It is calculated from open interest and can move during the day. It is not a guarantee that Nifty will close at that strike.
What does OI build-up mean?
OI build-up means open interest at a strike rose, so new positions were opened. Combined with the price move, traders read it as writers (or buyers) adding at that strike. Falling OI is unwinding — positions being closed or rolled.
Why don't I see live numbers until I connect a broker?
After Tredye stopped using NSE website data for legal safety, live Indian option-chain figures come only from the broker you connect. Your keys stay in your browser. Crypto pages can still use public exchange data; cash and F&O pages cannot.
Related pages
Bank Nifty OI analysis today
How to read Bank Nifty call and put walls, PCR and OI build-up, with a labelled example and a live panel after you connect.
FII DII data today
What official FII/FPI and DII figures mean, and the NSE and NSDL pages to open for today's numbers.
How to read an option chain
A step-by-step Academy lesson on calls, puts, ATM, LTP, OI and IV.
Options dashboard
Full Nifty and Bank Nifty chain, PCR, IV smile and writers' range once your broker is connected.
Disclaimer · Data Integrity · Community: ABCD_AI Discord and ABCD_AI Telegram