RSI (Relative Strength Index) explained

Updated 16 November 2026 · 9 min read · Educational, not investment advice

This lesson is for education only. It is not a recommendation to buy, sell or hold any security or derivative. Tredye is not a SEBI-registered investment adviser or research analyst. Any prices or levels below are made-up examples, not real market data. Trading in F&O involves substantial risk.

The Relative Strength Index (RSI) is a momentum indicator created by J. Welles Wilder in 1978. It measures how strong recent gains have been compared with recent losses and scales the result between 0 and 100. It is one of the most widely used indicators on Indian charts and screeners.

How RSI is calculated

  1. Pick a lookback, usually 14 periods (14 candles on whatever timeframe you use).
  2. Work out the average gain on up periods and the average loss on down periods, using Wilder's smoothing.
  3. Divide the two to get the relative strength: RS = average gain ÷ average loss.
  4. Convert it to an index: RSI = 100 − 100 ÷ (1 + RS).

If gains and losses are equal, RS is 1 and RSI is 50. If there have been only gains, RSI approaches 100. If only losses, it approaches 0.

Overbought and oversold

The classic levels are 70 and 30:

"Overbought" does not mean "about to fall". In strong uptrends, RSI can stay above 70 for a long time while price keeps climbing. Many traders therefore treat 70 as a sign of strength in a trend and only look for reversals when other evidence appears. Some adjust the levels to 80/20 for volatile stocks or 60/40 for trend context.

The 50 line

RSI above 50 means average gains are larger than average losses over the lookback, so momentum is positive. Below 50, momentum is negative. Watching whether RSI holds above or below 50 during pullbacks is a simple way to judge trend health.

Divergence

A divergence occurs when price and RSI disagree:

Divergences are warnings, not triggers. They can persist for several swings before anything happens, so traders usually wait for price to confirm, for example by breaking a support or resistance level.

Multi-timeframe RSI

RSI on a 5-minute chart and RSI on a daily chart can tell completely different stories. A stock may be oversold intraday while still in a strong daily uptrend. Checking RSI on several timeframes at once helps:

An illustrative example

A stock rallies for six days and daily RSI reaches 76. On the 15-minute chart, RSI has dropped from 80 to 45 as price pulls back. A trend-following trader might wait to see if 15-minute RSI recovers above 50 near a support zone, while a cautious trader notes that daily RSI is stretched and keeps position size small. These numbers are for learning only.

Limitations

Pair RSI with sector money flow and a clear exit plan from the risk management lesson.

A worked RSI calculation

Example (made-up numbers, simplified): suppose over the last 14 candles a stock had an average gain of ₹6 on up candles and an average loss of ₹3 on down candles.

  • RS = 6 ÷ 3 = 2
  • RSI = 100 − 100 ÷ (1 + 2) = 100 − 33.3 = 66.7

That reading says gains have been about twice as strong as losses, so momentum is positive but not yet at the classic overbought level of 70. Real RSI values use Wilder's smoothing, so each new candle blends into the previous average rather than replacing it.

RSI ranges in trends

Many traders notice that RSI behaves differently in trends:

  • In a healthy uptrend, RSI often swings between about 40 and 80, and pullbacks stop near 40 to 50.
  • In a downtrend, RSI often swings between about 20 and 60, and rallies stall near 50 to 60.

Watching where RSI pulls back to can therefore tell you whether the trend is still in control. An uptrend whose pullbacks start breaking below 40 may be weakening.

Combining RSI with price levels

RSI works best next to price structure. An oversold reading at a well-tested support zone carries more weight than an oversold reading in the middle of nowhere. Likewise, a bearish divergence at a major resistance level deserves more attention than one in a quiet range.

Common mistakes

  • Selling every time RSI crosses 70 in a strong trend.
  • Using RSI on very short timeframes, where it flips constantly.
  • Changing the period until the indicator "fits" past moves.

Seeing it on Tredye

The RSI multi-timeframe screener shows RSI for F&O stocks across several timeframes side by side, and Strength Boards rank stocks by relative performance. Live data needs your own broker connection.

See it on Tredye: RSI multi-timeframe screener · Strength Boards. Market dashboards show live data only from your own connected broker; otherwise they show labelled example data.

Frequently asked questions

What is a good RSI value to buy?

There is no universally good value. Readings below 30 are called oversold and above 70 overbought, but in strong trends RSI can stay at extremes for a long time, so it should be combined with other evidence.

What does RSI 14 mean?

It means the RSI is calculated over the last 14 candles of the chosen timeframe, the default setting Wilder proposed.

What is RSI divergence?

It is when price makes a new high or low but RSI does not, suggesting momentum is weakening. It is a warning sign rather than a trade signal on its own.

What RSI period is best for intraday trading?

Many use the standard 14 on a 5- or 15-minute chart. Shorter periods react faster but give more false signals.

Can RSI be used on indices like NIFTY?

Yes. RSI works on any price series, including indices, stocks and crypto.

Related lessons

← All F&O Academy lessons · Disclaimer

Join the ABCD_AI community · learn & discuss markets togetherDiscordTelegramInstagramYouTube